Nothing looks cleaner than removing those old clunky turn signals and replacing them with these Fork Mount LED Turn Signals Double color transformation! This product easily mounts to your front forks and wires into existing front turn signal wires. Use as turn signals or running lights.
WHY DO I NEED THIS?
Fork Mount LED Turn Signals Double color transformation are now even better! We now offer a true dual color LED chip allowing every LED to illuminate as both White and Amber. 2x the LEDs with virtually no gaps between the LEDs. Fork Mount LED Turn Signals Double color transformation are sleek LED strips that wrap around your motorcycle forks. The LEDs will illuminate WHITE as your Daytime Running Lights and switch to AMBER when your turn signal is activated. Now you can remove your front “lolli-pop” style motorcycle turn signals for a clean, custom look.
KEY DETAILS OF OUR PRODUCT
✔️MATERIAL: Soft rubber strip with 3528 SMD LED; Fitting ✔️LED LIGHT COLOR: While the bike is on, the white DRL's stay on. When a turn signal is activated, the White LEDs turn completely off for the entire turn signal cycle providing greater visibility to the amber turn signal. ✔️INSTALLATION: Mount with tape, 5 wires connection Perfect turn Signal Brake light and Running tail Light all-in-one for motorcycle, Car, Trailer. Lots of Common uses ✔️DESIGN: Our Fork Mount LED Turn Signals Double color transformation design snaps into place on the fork, and you can choose to use the included cable ties for additional security.
WHY BUY FORK MOUNT LED TURN SIGNALS?
Easy plug & play install
Super bright Amber LEDs
Heavy duty metal body
Built in voltage regulator
No need for resistors
Mounting hardware included
Power Draw: 6 Watts per signal (12W Pair)
Pod Size: 1.45″ (36.8mm) x 0.73″ (18.5mm) x 0.55″ (14mm)
WHAT OTHERS SAY ABOUT OUR FORK MOUNT LED TURN SIGNALS?
"These things worked as promised! I took the time to solder and shrink tube the connections to the factory plug. So it took a little bit of time. But it's otherwise pretty straight forward and easy, if you have some basic electrical knowledge. They are BRIGHT as running lights and turn signals, and are, as far I can tell well made. They stuck nicely and wrapped well around the 41mm forks on my Yamaha Stryker. I believe these are a 6500k since they are more on the blue spectrum. I will be buying another set to place on the bottom of the forks... hey, the more you're noticed. The better chance you have of making out there with all the crazies in their 4 wheeled boxes.. lol. Good luck!"
"I connected both the driving lights and the turn signals. So I have ultra bright driving lights that will flash red when I activate my turn signals. I was able to remove my factory lollipop signals and my bike looks so much better now. Absolutely love these things. Worth every penny!"
"Install was pretty simple and they held up to a season of riding so far. I do with the flash controller was wired closer to the lights so I could cut more slack from the wires easily, but the location can be modified too with some more splicing. These are very bright and definitely noticeable. The white running lights turn off when the amber signal flashes and then turns back on."